Preparation and painting area

  • Area de preparacion GA 1

BRAND: Celiber
MODEL: Grand Avantgarde
CATEGORY: Paint
REFERENCE / TYPE: PREPARATION AREA MODEL CRA 40-65 ELEGANCE SIMPLE WITH COURTAINS,AREA MODEL CRA 40-65 AVANTGARDE SIMPLE WITH COURTAINS,AREA MODEL CRB 40-65 AVANTGARDE SIMPLE WITH PANELS,AREA MODEL CRC 40-65 GRAND AVANTGARDE DOBLE WITH PANELS

Basic Description

Preparation area designed to sanding works and surfaces preparation, as well as simple painting works
Usually composed by a motor group, basement, plenum and perimeter closure area.

Specs

CELIBER EXCLUSIVE PANELS
Standard for models CRB AVANTGARDE y CRC GRAND AVANTGARDE
Our exclusive panels are made in only one piece, from top to bottom. Easy to assembly and the most important, they are manufactured with high efficiency rock wool (145 Kg/m³), which make them fireproof.
They are constituted by white pre-lacquered sheet in both sides, which are fixed to the rock wool by a special compound what together with the later vacuum pressed, results in a sandwich panel, rigid, robust and with no external connections. 
The panel has a reinforced structure inside, so other elements are no needed for fix it. As a result, the air flow is completely laminar and clean, as there are not obstacles or projections, so we do not find any air turbulence or particulate accumulation.
FIREPROOF COURTAINS
Standard for models CRA ELEGANCE Y CRA AVANTGARDE
Manual by guide rails, with a central transparent strip.
As option it can be electrically activated, like a retractable awning .
ASPIRATION GROUP
Standard for model CRA y CRB.
Designed by Celiber, aspiration group composed of:
Metallic support structure:
Composed by a galvanized and bended sheet with a thickness of 10/10, riveted and sealed, forming a compact structure, reinforced to give it a high rigidity.
The two panels which make up the mobile hatches that serves to the inspection of the filters and the ventilation section, are fixed to the structure with a quick disassembly system, that make possible an easy maintenance.
Every panel has some handles to make the movement easier.
Filter section:
Composed by stainless Steel trays that support 5 filters of 490 x 590 mm, with these characteristics:
Stainless Steel outline. Thickness of 5 mm.
Synthetic filter model VNF/290 with not woven fibers progressively structured.
The clean air face printed with the DIN identification and the allowed number.
Effectiveness: 90% gravimetric according to ASHRAE 52/76
Class: “G-3” according to European regulations EN-779.
Welded mesh of 12x24 of 0,7 mm with “V” form and fixing in a sandwich panel the filter.
Final leak to a dirty filter: 20 mm. H2O.
Ventilation section:
The ventilation section is composed by a triple paddle-wheel fan with double aspiration, joint to the motor by belts and pulleys. The fan is fixed with screws.
At the end of the tree of the fan a pulley is placed, and is where the trapezoidal drive belt passes.
The motor is installed on rails that allow an easy regulation of the belts tension.
Communication between group and Plenum is done by a T connexion with a valve to change the phase (spraying-drying) that is automatically controlled with the analogue control panel.

Carácteristicas Área de Pintado


GENERATOR GROUP
Standard for model CRC GRAND AVANTGARDE and optional in the rest of them.
Possibility of working with all the air flow in only one area, to make possible the painting jobs or share it for the two areas. (Available only in CRC GRAND AVANTGARDE model).
Designed by Celiber, generator group with two motors.
Transmisión directa – accionamiento directo entre el eje del motor y la turbina, sin correas ni poleas. Direct transmission- Directly from the axle and the turbine, no pulleys or belts.
Pressure control.
Big blades for an easy maintenance.
It can be placed on the sides, rear or on top over the Spray booths. Support structure as option.
Including ducts between generator group and plenum area.
HEAT SYSTEM (ONLY FOR GENERATOR GROUP OPTION)
Wide range of systems to heat the air:
Classic diesel or GAS burner with heat exchanger (boiler)
Direct Combustion gas burner, eliminating the outgoing gas chimney due to the total combustion of the gas.
Vapoure exchanger system.
Hot water heaters.
Electric reactance.
Heat recovery systems, recommended for low temperature areas, it can recover between 50 and 80% of the heat.
Possibility of control of relative humidity, using systems to drop the temperatura.
 
BASEMENTS
Several options to aspirate the air, with civil work or not.
Possibility of install reinforced grids on the tire tread.
 
ELECTRONIC LIGHTING
We use electronic reactance instead of chokes, assuring a longer life for the fluorescent lamps.  
LED LIGHTING
It is available as option. This is the first spray booth incorporating LED electronic screens, giving to 2.500 LUX of pure and white light, it is perfect for painting works as it is not polluted with other colors photons.
Less electronic consumption and durability for all its service life. Duration of LED screen: 80.000 hours of use.
 
CONTROL PANEL
Analog keyboard panel with buttons and cores.


Please contact us for prices and more information.

ADAPTABLE TO EVERY SIZE
As we are the manufacturer, we can make each part of the Spray Booth suitable for any measure.
Our production line make all the punching, folding and mechanizing work of every piece, previously designed by our Technical Office, avoiding this way all the development or implementation mistakes. 
PERFECT ASSEMBLY
Our technicians have been trained and homologated by CELIBER to ensure a proper assembly and the best working of the acquired Spray Booth.
TESTING
Before packing and shipment, our motor groups are tested in our facilities, avoiding possible working problems in the future.
WIDE RANGE OF PRICES
Always looking for the total satisfaction of our customer, we offer a wide range of prices depending on the desired options. 


Extras / Options

    • Pneumatic ramp for the basement over the floor.
    • Direct combustion gas burner (instead of diesel burner).
    • Vapour, gas or hot water exchanger (instead of diesel burner).
    • Electronic elements (instead of diesel burner).
    • Reinforced grids.
    • Tools trolley.
    • LED lighting.
    • Different sizes and dimensions
    • Input/output ducts.
    • Support structure for motor group.

Complete the form if you want more information about Preparation and painting area

Name:*
Surname:*
Company:*
Phone:*
Email:*

Back to previous page